ABS CF10 FR BK
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.070 % | |
| Water absorption rate | ASTM D-570 | 0.14 % | |
| density | ASTM D-792 | 1.26 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D-785 | 108 R-Scale | |
| tensile strength | ASTM D-638 | 89.6 MPa | |
| elongation at break | ASTM D-638 | 1.0 % | |
| Flexural modulus | ASTM D-790 | 8760 MPa | |
| bending strength | ASTM D-790 | 132 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 37.4 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 160 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D-257 | 1.0E+1to1.0E+2 ohms | |
| Volume resistivity | ASTM D-257 | 1.0E+1to1.0E+2 Ohm.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 102 ℃ | |
| ASTM D-648 | 98.9 ℃ | ||
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000020 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top