Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS CF10 FR BK USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | USA TPC/CF10 FR BK |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 89.6 MPa |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 37.4 J/m |
| bending strength | ASTM D-790 | 132 MPa | |
| Rockwell hardness | ASTM D-785 | 108 R-Scale | |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D-256 | 160 J/m |
| elongation at break | ASTM D-638 | 1.0 % | |
| Flexural modulus | ASTM D-790 | 8760 MPa |
| Electrical performance | Test Condition | Test Method | USA TPC/CF10 FR BK |
|---|---|---|---|
| Surface Resistivity | ASTM D-257 | 1.0E+1to1.0E+2 ohms | |
| Volume resistivity | ASTM D-257 | 1.0E+1to1.0E+2 Ohm.cm |
| physical property | Test Condition | Test Method | USA TPC/CF10 FR BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.14 % |
| Shrinkage rate | Flow(3.18mm) | ASTM D-955 | 0.070 % |
| density | ASTM D-792 | 1.26 g/cm3 |
| Thermal performance | Test Condition | Test Method | USA TPC/CF10 FR BK |
|---|---|---|---|
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000020 cm/cm/℃ |
| Heat distortion temperature | 0.45MPa，未退火，HDT | ASTM D-648 | 102 ℃ |
| 1.80MPa，未退火，HDT | ASTM D-648 | 98.9 ℃ | |
| UL flame retardant rating | 1.50mm | UL 94 | V-0 |
Contact Us
Get App
Top