PFA NEOFLON® AP-201

192

Properties:
High temperature strength
copolymer
High mobility
Good liquidity
High transparency
Usages:
Wire sheath
Compare
View Prices

Technical Data Sheet

physical property	Test Method	Test Result
density	ASTM D792	2.14 - 2.16 g/cm³
Apparent density	JIS K6891	1.00 to 1.40 g/cm³
melt mass-flow rate	ASTM D1238	20 to 30 g/10min
Water absorption rate	ASTM D570	< 0.010 %
Apparent viscosity		2.00E+6 - 2.50E+7 mPa·s

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	无断裂

Mechanical properties	Test Condition	Test Method	Test Result
Shore hardness		ASTM D2240	60 to 70
tensile strength		JIS K6891	24.5 to 29.4 Mpa
Tensile strain		JIS K6891	350 to 450 %
Flexural modulus		ASTM D790	580 to 690 Mpa
Compression Modulus		ASTM D695	490 to 590 Mpa
compressive strength		ASTM D695	4.90 to 5.90 Mpa
compressive strength	compressive strength		ASTM D695	31.4 to 33.3 Mpa
coefficient of friction			0.040 to 0.050
Heat distortion temperature		ASTM D621	2.50 to 3.00 %
	Heat distortion temperature		ASTM D621	8.00 to 9.00 %
		Heat distortion temperature		ASTM D621	2.00 to 3.00 %
		Heat distortion temperature	Heat distortion temperature		ASTM D621	8.50 to 9.50 %
bending strength		ASTM D790	No break

Flame retardant performance	Test Condition	Test Method	Test Result
1.60 mm??1.6 mm		UL 94	V-0
Limiting Oxygen Index		ASTM D2863	> 95 %

Thermal performance	Test Method	Test Result
melting temperature	ASTM D4591	300 to 310 °C
Linear coefficient of thermal expansion	ASTM D696	0.00012 1/℃
Specific heat capacity		1050 J/kg/℃
thermal conductivity	ASTM C177	0.26 W/m/K

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PFA NEOFLON® AP-201

Technical Data Sheet

You May Like