PEK LUVOCOM® 1104-7452 VP

Properties:
Fillers
glass fiber reinforced materials
Usages:
Application and engineering accessories in the automotive field
Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate		<0.10 %
density	ISO 1183	1.53 g/cm³
Shrinkage rate	DIN 16901	0.30to0.60 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	11500 MPa
tensile strength	Break	ISO 527-2	180 MPa
Tensile strain	Yield	ISO 527-2	2.1 %
Flexural modulus		ISO 178	9000 MPa
bending strength		ISO 178	260 MPa
Bending Strain		ISO 178	2.7 %

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	8.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1fU	45 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC 60167	>1.0E+12 ohms

Thermal performance	Test Method	Test Result
Continuous use temperature	UL 746B	260 °C
maximum service temperature		290 °C
vicat	ISO 306/A	325 °C
Linear coefficient of thermal expansion	DIN 53752	2.2E-05 cm/cm/°C
thermal conductivity	DIN 52612	0.40 W/m/K

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top