Phenolic Plenco 07552 (Transfer) Plastics Engineering Co.

Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ASTM D792	1.78 g/cm³
Apparent density	ASTM D1895	0.71 g/cm³
Shrinkage rate	ASTM D955	0.14 %
Water absorption rate	ASTM D570	0.090 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTM D785	78

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0
Limiting Oxygen Index		ASTM D2863	46 %

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ASTM D256	62.0 J/m
Impact strength of cantilever beam gap		ASTM D256	57 J/m

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	13100 MPa
tensile strength		ASTM D638	57.0 MPa
elongation	Break	ASTM D638	0.60 %
Flexural modulus		ASTM D790	12800 MPa
bending strength		ASTM D790	102 MPa
compressive strength		ASTM D695	168 MPa

Electrical performance	Test Method	Test Result
Volume resistivity	ASTM D257	1.3E+12 ohms·cm
dielectric strength	ASTM D149	14 kV/mm
dielectric constant	ASTM D150	5.00
Dissipation Factor	ASTM D150	0.033
Compared to the Leakage Tracking Index (CTI)	UL 746	PLC 3
arc resistance	ASTM D495	184 sec

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648	280 °C
Continuous use temperature	ASTM D794	225 °C
Linear coefficient of thermal expansion	ASTME831	4.2E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top