Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Plenco 07552 (Transfer) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
Charpy Notched Impact StrengthASTM D25662.0 J/m
Impact strength of cantilever beam gapASTM D25657 J/m
hardnessTest ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
Rockwell hardnessE计秤ASTM D78578
Electrical performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
Volume resistivityASTM D2571.3E+12 ohms·cm
dielectric strengthASTM D14914 kV/mm
Dissipation Factor1MHzASTM D1500.033
dielectric constant1MHzASTM D1505.00
Compared to the Leakage Tracking Index (CTI)CTIUL 746PLC 3
arc resistanceASTM D495184 sec
Mechanical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
elongation断裂ASTM D6380.60 %
tensile strength ASTM D63857.0 MPa
compressive strengthASTM D695168 MPa
Tensile modulusASTM D63813100 MPa
Flexural modulusASTM D79012800 MPa
bending strengthASTM D790102 MPa
flammabilityTest ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
UL flame retardant rating1.5mmUL 94V-0
Limiting Oxygen IndexASTM D286346 %
physical property Test ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
Shrinkage rateMDASTM D9550.14 %
Water absorption rate24hrASTM D5700.090 %
Apparent densityASTM D18950.71 g/cm³
densityASTM D7921.78 g/cm³
Thermal performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 07552 (Transfer)
Heat distortion temperature1.8MPa,未退火，HDTASTM D648280 °C
Continuous use temperatureASTM D794225 °C
Linear coefficient of thermal expansionMDASTME8314.2E-05 cm/cm/°C

Contact Us

Get App

Top