ASA WR/MI-E

Properties:
Good impact resistance
Compare

Technical Data Sheet

Basic performance	Test Method	Test Result
density	ISO 1183	1060 kg/m
	ISO 1133	11.0 cm
Water absorption rate	ISO 62	1.2 %

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-1,-2	2200 MPa
yield stress	ISO 527-1,-2	46.0 MPa
yield strain	ISO 527-1,-2	3.5 %
fracture strain	ISO 527-1,-2	37.0 %
Charpy notch impact strength	ISO 179/1eA	11.0 KJ/m

Electrical performance	Test Condition	Test Method	Test Result
		IEC 60250	3.20
			IEC 60250	3.00
Dielectric loss factor		IEC 60250	0.012
Dielectric loss factor	Dielectric loss factor		IEC 60250	0.0090
Surface Resistivity		IEC 60093	>1.0E+15 ohms
Volume resistivity		IEC 60093	>1.0E+13 ohm.m

Thermal performance	Test Condition	Test Method	Test Result
linear expansion coefficient		ISO 11359-1,-2	0.000090 cm/cm℃
linear expansion coefficient	linear expansion coefficient		ISO 11359-1,-2	0.000090 cm/cm℃
		ISO 75-1,-2	104 ℃
			ISO 75-1,-2	87.0
vicat		ISO 306	102 ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top