ABS PTS PCA-2201NHV

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.17 g/cm³
melt mass-flow rate		ASTMD1238	12 g/10min
melt mass-flow rate	melt mass-flow rate		ASTMD1238	16 g/10min
Shrinkage rate		ASTMD955	0.40到0.60 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	5VA
UL flame retardant rating	UL flame retardant rating		UL94	5VA
Burning wire flammability index		IEC60695-2-12	925 °C
	Burning wire flammability index		IEC60695-2-12	925 °C
	Burning wire flammability index	Burning wire flammability index		IEC60695-2-12	950 °C
Hot filament ignition temperature		IEC60695-2-13	700 °C
	Hot filament ignition temperature		IEC60695-2-13	700 °C
	Hot filament ignition temperature	Hot filament ignition temperature		IEC60695-2-13	700 °C
UL flame retardant rating		UL94	V-0
UL flame retardant rating	UL flame retardant rating		UL94	5VB

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	590 J/m

Mechanical properties	Test Method	Test Result
tensile strength	ASTMD638	60.0 MPa
elongation	ASTMD638	65 %
Flexural modulus	ASTMD790	2690 MPa
bending strength	ASTMD790	88.9 MPa

Electrical performance	Test Condition	Test Method	Test Result
Hot wire ignition (HWI)		UL746	PLC 2
dielectric strength		ASTMD149	18 kV/mm
Compared to the Leakage Tracking Index (CTI)		UL746	>600 V
Compared to the Leakage Tracking Index (CTI)	Compared to the Leakage Tracking Index (CTI)		UL746	PLC 0
High arc combustion index (HAI)		UL746	60.0到120
	High arc combustion index (HAI)		UL746	60.0到120
		High arc combustion index (HAI)		UL746	60.0到120
			High arc combustion index (HAI)		UL746	PLC 1
				High arc combustion index (HAI)		UL746	PLC 1
				High arc combustion index (HAI)	High arc combustion index (HAI)		UL746	PLC 1
High Voltage Arc Traceability Rate (HVTR)		UL746	80.0到150 mm/min
High Voltage Arc Traceability Rate (HVTR)	High Voltage Arc Traceability Rate (HVTR)		UL746	PLC 3
Hot wire ignition (HWI)		UL746	15到30 sec
	Hot wire ignition (HWI)		UL746	15到30 sec
		Hot wire ignition (HWI)		UL746	30到60 sec
			Hot wire ignition (HWI)		UL746	PLC 3
			Hot wire ignition (HWI)	Hot wire ignition (HWI)		UL746	PLC 3

Thermal performance	Test Method	Test Result
	ASTMD648	85.0 °C
RTI Elec	UL746	60.0 °C
RTI Imp	UL746	60.0 °C
RTI	UL746	60.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top