plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS PTS PCA-2201NHV PTS USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodPTS USA/PTS PCA-2201NHV
Hot deformation temperature1.8MPa,UnannealedASTM D64885.0 °C
RTIUL 74660.0 °C
RTI ElecUL 74660.0 °C
RTI ImpUL 74660.0 °C
mechanical propertiesTest ConditionTest MethodPTS USA/PTS PCA-2201NHV
Bending modulus3.17mmASTM D7902690 MPa
bending strengthYield,3.17mmASTM D79088.9 MPa
elongationBreak,3.17mmASTM D63865 %
tensile strengthYield,3.17mmASTM D63860.0 MPa
Electrical performanceTest ConditionTest MethodPTS USA/PTS PCA-2201NHV
Compared to the anti leakage trace indexCTIUL 746PLC 0
Dielectric strengthASTM D14918 kV/mm
High arc combustion index2.5mmUL 746PLC 1
3.00mmUL 746PLC 0
1.50mmUL 746PLC 0
2.50mmUL 746PLC 0
1.5mmUL 746PLC 1
3.0mmUL 746PLC 1
High voltage arc tracing rateHVTRUL 746PLC 3
HVTRUL 746PLC 4 mm/min
Hot wire ignition2.50mmUL 746PLC 2 sec
3.0mmUL 746PLC 2
1.5mmUL 746PLC 3
3.00mmUL 746PLC 1 sec
2.5mmUL 746PLC 3
1.50mmUL 746PLC 2 sec
Physical propertiesTest ConditionTest MethodPTS USA/PTS PCA-2201NHV
densityASTM D7921.17 g/cm³
melt mass-flow rate230°C/3.8kgASTM D123812 g/10min
260°C/2.16kgASTM D123816 g/10min
Shrinkage rateMDASTM D9550.40to0.60 %
impact performanceTest ConditionTest MethodPTS USA/PTS PCA-2201NHV
Impact strength of cantilever beam gap3.17mmASTM D256590 J/m
flammabilityTest ConditionTest MethodPTS USA/PTS PCA-2201NHV
Burning wire flammability index3.0mmIEC 60695-2-12950 °C
1.5mmIEC 60695-2-12925 °C
2.0mmIEC 60695-2-12925 °C
Hot filament ignition temperature2.0mmIEC 60695-2-13700 °C
3.0mmIEC 60695-2-13700 °C
1.5mmIEC 60695-2-13700 °C
UL flame retardant rating2.5mmUL 945VA
3.0mmUL 945VA
2.0mmUL 945VB
1.5mmUL 94V-0

Contact Us

Get App

Top