PPS INFINO® EW-2120G
30
- Properties:Flame retardantFiller: Glass fiber reinf40% filler by weight
- Usages:Electronic and electrical componentsApplication in the automotive field
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO62 | % | |
| density | 1.45 g/cm³ |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| proof tracking index | IEC60112 | 500 3mm/v | |
| Surface Resistivity | IEC60093 | 1.00E+13 Ω | |
| Linear forming shrinkage rate | ISO2577 | 0.6 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength at break | ISO527 | 140 Mpa | |
| elongation at break | ISO527 | 2.2 % | |
| Yield bending strength | ISO178 | 220 Mpa | |
| Flexural modulus | ISO178 | 10000 Mpa | |
| Charpy Notched Impact Strength | 15 kJ/m² | ||
| Impact strength of simply supported beam without notch | 60 kJ/m² |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL94 | V0 ℃ | ||
| ℃ | |||
| ℃ | |||
| ℃ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature 1.8MPa | ISO76 | 190 ℃ | |
| Hot deformation temperature 0.45MPa | ISO76 | ℃ | |
| GWFI | IEC60695-2-12 | 960 ℃ | |
| IEC60695-2-12 | ℃ | ||
| IEC60695-2-12 | ℃ | ||
| IEC60695-2-12 | ℃ | ||
| GWIT | IEC60695-2-13 | ℃ | |
| IEC60695-2-13 | ℃ | ||
| IEC60695-2-13 | ℃ | ||
| IEC60695-2-13 | ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top