PEK LUVOCOM® 1104-8928

Properties:
Filler
Lehmann
Germany
Usages:
Applications in the fields of cams
engineering accessories
and automobiles
Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate		<0.50 %
density	ISO 1183	1.35 g/cm³
Shrinkage rate	DIN 16901	1.0to1.6 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	5000 MPa
tensile strength	Break	ISO 527-2	97.0 MPa
Tensile strain	Yield	ISO 527-2	4.5 %
Flexural modulus		ISO 178	4500 MPa
bending strength		ISO 178	173 MPa
Bending Strain		ISO 178	6.8 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	53 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC 60167	>1.0E+12 ohms

Thermal performance	Test Method	Test Result
Continuous use temperature	UL 746B	260 °C
Heat distortion temperature	ISO 75-2/A	162 °C
thermal conductivity	DIN 52612	0.25 W/m/K
maximum service temperature		280 °C
vicat	ISO 306/A	300 °C
Linear coefficient of thermal expansion	DIN 53752	4.7E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top