Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEK LUVOCOM® 1104-8928 LEHVOSS Group
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1104-8928 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 53 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1104-8928 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 5000 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 97.0 MPa |
| Tensile strain | 屈服 | ISO 527-2 | 4.5 % |
| Bending Strain | ISO 178 | 6.8 % | |
| Flexural modulus | ISO 178 | 4500 MPa | |
| bending strength | ISO 178 | 173 MPa |
| Electrical performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1104-8928 |
|---|---|---|---|
| insulation resistance | IEC 60167 | >1.0E+12 ohms |
| physical property | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1104-8928 |
|---|---|---|---|
| Shrinkage rate | DIN 16901 | 1.0to1.6 % | |
| Water absorption rate | 23°C,24hr | <0.50 % | |
| density | ISO 1183 | 1.35 g/cm³ |
| Thermal performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1104-8928 |
|---|---|---|---|
| thermal conductivity | DIN 52612 | 0.25 W/m/K | |
| Continuous use temperature | UL 746B | 260 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 162 °C |
| vicat | ISO 306/A | 300 °C | |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 4.7E-05 cm/cm/°C |
| maximum service temperature | ShortTerm | 280 °C |
Contact Us
Get App
Top