TPX

TPX TPX™ MX004 MITSUI CHEM JAPAN

Properties:
High temperature resistantransparent
Usages:
Medical packagingBottle capHeat-resistant filmTransparent tube rodChemical resistant floatSyringe
Compare View Prices

Technical Data Sheet

Other performance	Test Method	Test Result
Transmittance rate	ASTM D-1746	94 %
Ambiguity degree	ASTM D-1746	0.7 %
Refractive index	ASTM D-542	1.463 ND

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ASTM D-638	21 Mpa
elongation	Break	ASTM D-638	48 %
bending strength		ASTM D-790	34 Mpa
Elastic modulus		ASTM D-790	980 Mpa
Rockwell hardness		ASTM D-785	R73
Tensile modulus		ASTM D-638	1180 Mpa
Impact strength of cantilever beam gap		ASTM D-256	98 KJ/m
tensile strength		ASTM D-638	20 Mpa

thermal performance	Test Condition	Test Method	Test Result
specific heat		ASTM C-351	0.47 cal/g℃
Hot deformation temperature	4.6 kg/cm	ASTM D-648	80 °C
Linear coefficient of thermal expansion		ASTM D-696	1.17*10 1/℃
thermal conductivity		ASTM BS-847A	4*10 calcm/seccm
Vicat softening temperature		ASTM D-1525	170 °C
Shrinkage rate	Across Flow/Across Flow	MCI方法	1.9/1.7 %
Burning rate		ASTM D-635	2.54 cm/min

Physical properties	Test Condition	Test Method	Test Result
Melting temperature		MCI方法	227 °C
melt mass-flow rate		ASTM D-1238	25 g/10min

Electrical performance	Test Condition	Test Method	Test Result
Dielectric constant	100～1MHz	ASTM D-150	2.12
Water absorption rate	24hr	ASTM D-570	0.01 %
Dielectric dissipation factor	23℃, 1MHz	ASTM D-150	0.015
Volume resistivity		ASTM D-257	>10 Ωcm
Dielectric strength		ASTM D-149	65 KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

TPX TPX™ MX004 MITSUI CHEM JAPAN

Technical Data Sheet

You May Like