Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPX MX004 MITSUI CHEM JAPAN
TPX™
Medical packaging、Bottle cap、Heat-resistant film、Transparent tube rod、Chemical resistant float、Syringe
High temperature resistan、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | MITSUI CHEM JAPAN/MX004 |
|---|---|---|---|
| refractive index | ASTM D-542 | 1.463 ND | |
| transmittance | ASTM D-1746 | 94 % | |
| ambiguity | ASTM D-1746 | 0.7 % |
| Mechanical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/MX004 |
|---|---|---|---|
| ROCKWELL hardness | ASTM D-785 | R73 | |
| elongation | 断裂 | ASTM D-638 | 48 % |
| Tensile modulus | ASTM D-638 | 1180 Mpa | |
| Izod impact strength | ASTM D-256 | 98 KJ/m | |
| tensile strength | ASTM D-638 | 20 Mpa | |
| Elastic modulus | ASTM D-790 | 980 Mpa | |
| elastic strength | ASTM D-790 | 34 Mpa | |
| Yield tensile strength | ASTM D-638 | 21 Mpa |
| Electrical performance | Test Condition | Test Method | MITSUI CHEM JAPAN/MX004 |
|---|---|---|---|
| dielectric constant | 100～1MHz | ASTM D-150 | 2.12 |
| Dielectric dissipation factor | 23℃, 1MHz | ASTM D-150 | 0.015 |
| dielectric strength | ASTM D-149 | 65 KV/mm | |
| volume resistivity | ASTM D-257 | >10 Ωcm | |
| Water absorption rate | 24hr | ASTM D-570 | 0.01 % |
| physical property | Test Condition | Test Method | MITSUI CHEM JAPAN/MX004 |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 25 g/10min | |
| melting point | MCI方法 | 227 °C |
| Thermal performance | Test Condition | Test Method | MITSUI CHEM JAPAN/MX004 |
|---|---|---|---|
| 4.6 kg/cm | ASTM D-648 | 80 °C | |
| specific heat | ASTM C-351 | 0.47 cal/g℃ | |
| ASTM BS-847A | 4*10 calcm/seccm | ||
| Linear expansion coefficient | ASTM D-696 | 1.17*10 1/℃ | |
| burning rate | ASTM D-635 | 2.54 cm/min | |
| Vicat softening point | ASTM D-1525 | 170 °C | |
| Shrinkage rate of mold | 纵向/横向 | MCI方法 | 1.9/1.7 % |
Contact Us
Get App
Top