ABS SAXALAC™ 420HI

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density			1.20 g/cm³
Melt volume flow rate		ISO1133	50.0 cm³/10min
	Melt volume flow rate		ISO1133	6.00 cm³/10min
	Melt volume flow rate	Melt volume flow rate		ISO1133	0.40到0.70 %
water content		内部方法	<0.20 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	V-0
Burning wire flammability index		IEC60695-2-12	750 °C

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO179/1eU	42 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO179/1eU	65 kJ/m²
Impact strength of cantilever beam gap		ISO180/1A	4.0 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/1A	10 kJ/m²
		ISO180	40 kJ/m²
			ISO180	40 kJ/m²
Charpy Notched Impact Strength		ISO179/1eA	4.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO179/1eA	9.0 kJ/m²

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO527-2	2300 MPa
Tensile stress	ISO527-2	40.0 MPa
Tensile strain	ISO527-2	15 %

Thermal performance	Test Method	Test Result
BallPressure Test	IEC60335-1	通过
	ISO75-2/A	82.0 °C
vicat	ISO306/B50	93.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top