MMBS 145 INEOS Barex
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.20to0.60 % | |
| Water absorption rate | ASTM D570 | 0.10 % | |
| ISO 62 | 0.10 % | ||
| density | ASTM D792 | 1.04 g/cm³ | |
| ISO 1183 | 1.04 g/cm³ | ||
| melt mass-flow rate | ASTM D1238 | 3.5 g/10min | |
| Melt volume flow rate | ISO 1133 | 3.50 cm³/10min | |
| Shrinkage rate | ASTM D955 | 0.20to0.60 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ASTM D1003 | 2.0 % | |
| transmissivity | ASTM D1003 | 90.0 % | |
| refractive index | ASTM D542 | 1.570 | |
| ISO 489 | 1.570 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2240 MPa | |
| ISO 527-2 | 2240 MPa | ||
| tensile strength | ASTM D638 | 27.6 MPa | |
| ISO 527-2 | 28.0 MPa | ||
| elongation | Break | ASTM D638 | 40 % |
| Flexural modulus | ASTM D790 | 2280 MPa | |
| ISO 178 | 2280 MPa | ||
| bending strength | ASTM D790 | 55.2 MPa | |
| ISO 178 | 55.0 MPa | ||
| Rockwell hardness | M-Scale | ASTM D785 | 80 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 53 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 92.2 °C | ||
| vicat | ASTM D15253 | 97.8 °C | |
| maximum service temperature | 250 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top