Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MMBS 145 INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | INEOS Barex/145 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 53 J/m |
| Mechanical properties | Test Condition | Test Method | INEOS Barex/145 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 40 % |
| Rockwell hardness | M级 | ASTM D785 | 80 |
| tensile strength | 屈服,23°C | ISO 527-2 | 28.0 MPa |
| Tensile modulus | ASTM D638 | 2240 MPa | |
| ISO 527-2 | 2240 MPa | ||
| Flexural modulus | ASTM D790 | 2280 MPa | |
| ISO 178 | 2280 MPa | ||
| bending strength | ASTM D790 | 55.2 MPa | |
| tensile strength | 屈服,23°C | ASTM D638 | 27.6 MPa |
| bending strength | ISO 178 | 55.0 MPa |
| optical performance | Test Condition | Test Method | INEOS Barex/145 |
|---|---|---|---|
| transmissivity | 550nm | ASTM D1003 | 90.0 % |
| refractive index | ASTM D542 | 1.570 | |
| Haze ratio | ASTM D1003 | 2.0 % | |
| refractive index | ISO 489 | 1.570 |
| physical property | Test Condition | Test Method | INEOS Barex/145 |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 3.5 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.20to0.60 % |
| Water absorption rate | 饱和,23°C | ASTM D570 | 0.10 % |
| Shrinkage rate | ISO 294-4 | 0.20to0.60 % | |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.10 % |
| density | ASTM D792 | 1.04 g/cm³ | |
| ISO 1183 | 1.04 g/cm³ | ||
| Melt volume flow rate | 200°C/5.0kg | ISO 1133 | 3.50 cm³/10min |
| Thermal performance | Test Condition | Test Method | INEOS Barex/145 |
|---|---|---|---|
| vicat | ASTM D15253 | 97.8 °C | |
| Heat distortion temperature | 1.8MPa,Annealed，HDT | 92.2 °C | |
| maximum service temperature | 250 °C |
Contact Us
Get App
Top