PA6 PA NE 30-3M Poly Plastic
0
- Properties:Fillersglass fiber reinforced materials
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.42 g/cm³ | ||
| Shrinkage rate | 0.30to0.50 % | ||
| Water absorption rate | ISO 62 | 0.85 % | |
| 6.1 % | |||
| 1.9 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | 170 MPa | |
| Tensile strain | Break | 6.0 % | |
| Flexural modulus | 9000 MPa | ||
| bending strength | 255 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | 7.0 kJ/m² | ||
| Impact strength of simply supported beam without notch | 50 kJ/m² | ||
| 70 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | 1E+13 ohms | ||
| Volume resistivity | 1E+17 ohms·cm | ||
| 1E+15 ohms·cm | |||
| Surface Resistivity | 1E+15 ohms | ||
| dielectric strength | 22to25 kV/mm | ||
| 14to19 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 205 °C | ||
| melting temperature | 219 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top