PA6 EPLAMID 66 GFS 25 HS NC
0
- Properties:Features25% fiberglass reinforcementthermal stabilitylubricationinjection molding
- Usages:Bearing retainer
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.28 g/cm³ | |
| ash content | ISO 3451-4 | 25 % | |
| water content | ISO 15512 | 0.2 % | |
| Shrinkage rate | ISO 294-4 | 0.3-0.6 % |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL -94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 7200 N/mm² | |
| bending strength | ISO 178 | 205 N/mm² | |
| Impact strength of cantilever beam gap | ISO 180/1A | 9 KJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 10 KJ/m² | |
| hardness | ISO 868 | 88 | |
| Tensile modulus | ISO 527-2 | 7500 N/mm² | |
| tensile strength | ISO 527-2 | 145 N/mm² | |
| Tensile stress | ISO 527-2 | 2 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 3146 | 250 ℃ | |
| Hot deformation temperature (HDT) | ISO 75-2/B | 255 ℃ | |
| ISO 75-2/A | 250 ℃ | ||
| vicat | ISO 306/B50 | 255 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top