POM Copolymer Ekatal® H 12 Sattler KunststoffWerk GmbH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 12 g/10min | |
| density | ISO 1183 | 1.42 g/cm³ |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 6.3 kJ/m² | |
| ISO 179/1eA | 4.8 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ISO 178 | 104 MPa | |
| Tensile modulus | ISO 527-2 | 3030 MPa | |
| tensile strength | Yield | ISO 527-2 | 72.5 MPa |
| Break | ISO 527-2 | 71.4 MPa | |
| Tensile strain | Yield | ISO 527-2 | 10 % |
| Break | ISO 527-2 | 16 % | |
| Flexural modulus | ISO 178 | 2870 MPa | |
| bending strength | ISO 178 | 81.3 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Af | 102 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1E-04 cm/cm/°C | |
| ISO 11359-2 | 1E-04 cm/cm/°C | ||
| ISO 11359-2 | 9.4E-05 cm/cm/°C | ||
| ISO 11359-2 | 1.2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top