PP+EPDM POLYelast TPE HJ-75 UV POLYKEMI SWEDEN

Properties:
Filler
mineral filler
12%
filler by weight
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	0.980 g/cm³
melt mass-flow rate		ISO 1133	12 g/10min

hardness	Test Condition	Test Method	Test Result
Shore hardness		ASTM D2240	55

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ISO 527-2	18.0 MPa
Tensile strain	Break	ISO 527-2	>100 %
Flexural modulus		ISO 178	1000 MPa

Impact resistance	Test Method	Test Result
Charpy Notched Impact Strength	ISO 179	8.0 kJ/m²
Impact strength of simply supported beam without notch	ISO 179	无断裂
Impact strength of cantilever beam gap	ISO 180/4A	7.0 kJ/m²

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/B	100 °C
vicat	ISO 306/A50	125 °C
Linear coefficient of thermal expansion	内部方法	6.5E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top