Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP+EPDM POLYelast TPE HJ-75 UV POLYKEMI SWEDEN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | POLYKEMI SWEDEN/POLYelast TPE HJ-75 UV |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30°C | ISO 180/4A | 7.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 无断裂 |
| Charpy Notched Impact Strength | -20°C | ISO 179 | 8.0 kJ/m² |
| hardness | Test Condition | Test Method | POLYKEMI SWEDEN/POLYelast TPE HJ-75 UV |
|---|---|---|---|
| Shore hardness | 邵氏D,15秒 | ASTM D2240 | 55 |
| Mechanical properties | Test Condition | Test Method | POLYKEMI SWEDEN/POLYelast TPE HJ-75 UV |
|---|---|---|---|
| Flexural modulus | 23°C | ISO 178 | 1000 MPa |
| tensile strength | ISO 527-2 | 18.0 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >100 % |
| physical property | Test Condition | Test Method | POLYKEMI SWEDEN/POLYelast TPE HJ-75 UV |
|---|---|---|---|
| density | ISO 1183 | 0.980 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 12 g/10min |
| Thermal performance | Test Condition | Test Method | POLYKEMI SWEDEN/POLYelast TPE HJ-75 UV |
|---|---|---|---|
| vicat | ISO 306/A50 | 125 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 100 °C |
| Linear coefficient of thermal expansion | MD | 内部方法 | 6.5E-05 cm/cm/°C |
Contact Us
Get App
Top