Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO294-4 | 1.1 % |
| Shrinkage rate | | ISO294-4 | 1.0 % |
| Water absorption rate | | ISO62 | 4.7 % |
| HumidityAbsorption-62%RH | | ISO1110 | 1.5 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Burning rate 4 | | FMVSS302 | <100 mm/min |
| FlameRating | | UL94 | HB |
| GlowWireFlammability Index | | IEC60695-2-12 | 650 °C |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ReinforcementContent | | ISO1172 | 50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1 | 5700 Mpa |
| Tensile stress | | ISO527-2/5 | 75.0 Mpa |
| Tensile strain | | ISO527-2/5 | 4.0 % |
| Bending modulus 2 | | ISO178 | 5200 Mpa |
| Bending stress 2 | | ISO178 | 135 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 32 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 42 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+13 ohms |
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| CTI | | IEC60112 | 500 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 188 °C |
| | ISO75-2/A | 75.0 °C |
| Melting temperature 5 | | DINEN11357-1 | 225 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices