HMW-HDPE LUBMER™ LS4140
0
- Properties:Thermal performance
- Usages:Automotive internal partsgearsbearings
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | 8E-05 cm/cm/°C | |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 25 kV/mm | |
| dielectric constant | ASTM D150 | 3.20 | |
| Water absorption rate | ASTM D570 | 1.5 % | |
| Dissipation Factor | ASTM D150 | 0.016 | |
| UL flame retardant rating | UL 94 | HB | |
| density | ASTM D792 | 1.10 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.80 % | |
| ASTM D955 | 1.0 % | ||
| tensile strength | ASTM D638 | 60.0 MPa | |
| ASTM D638 | 62.0 MPa | ||
| elongation | ASTM D638 | 150 % | |
| Flexural modulus | ASTM D790 | 2200 MPa | |
| bending strength | ASTM D790 | 82.0 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 88 J/m | |
| Rockwell hardness | R-Scale | ASTM D785 | 102 |
| Heat distortion temperature | ASTM D648 | 175 °C | |
| vicat | ASTM D15254 | 200 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top