Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.12 g/cm³ |
| Specific volume | | | 0.893 cm³/g |
| Shrinkage rate | | ASTM D955 | 1.3to1.6 % |
| Water absorption rate | | ASTM D570 | 1.5 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D638 | 72.4 MPa |
| elongation | Yield | ASTM D638 | >50 % |
| Flexural modulus | | ASTM D790 | 2760 MPa |
| shear strength | | ASTM D732 | 65.5 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 59 J/m |
| Suspended wall beam without notch impact strength | | ASTM D256 | 1600 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTM D257 | 1E+16 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 71.1 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 8.3E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare