Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 INLUBE PA6SI2 USA Infinity LTL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Infinity LTL/INLUBE PA6SI2 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 59 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 1600 J/m |
| Electrical performance | Test Condition | Test Method | USA Infinity LTL/INLUBE PA6SI2 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+16 ohms |
| Mechanical properties | Test Condition | Test Method | USA Infinity LTL/INLUBE PA6SI2 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | >50 % |
| Flexural modulus | ASTM D790 | 2760 MPa | |
| tensile strength | 屈服 | ASTM D638 | 72.4 MPa |
| shear strength | ASTM D732 | 65.5 MPa |
| flammability | Test Condition | Test Method | USA Infinity LTL/INLUBE PA6SI2 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | USA Infinity LTL/INLUBE PA6SI2 |
|---|---|---|---|
| Specific volume | 0.893 cm³/g | ||
| Shrinkage rate | MD | ASTM D955 | 1.3to1.6 % |
| Water absorption rate | 24hr | ASTM D570 | 1.5 % |
| density | ASTM D792 | 1.12 g/cm³ |
| Thermal performance | Test Condition | Test Method | USA Infinity LTL/INLUBE PA6SI2 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 71.1 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 8.3E-05 cm/cm/°C |
Contact Us
Get App
Top