PC+ABS Jamplast JPPCABSI

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTMD1238	3.0 g/10min
Shrinkage rate		ASTMD955	0.70 %
Water absorption rate		ASTMD570	0.15 %
Water absorption rate	Water absorption rate		ASTMD570	0.32 %
density		ASTMD792	1.13 g/cm³

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTMD785	115

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ASTMD638	53.1 MPa
tensile strength	tensile strength	Break	ASTMD638	44.8 MPa
elongation	Break	ASTMD638	130 %
Flexural modulus		ASTMD790	2340 MPa
bending strength	Yield	ASTMD790	82.7 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	430 J/m
	Impact strength of cantilever beam gap		ASTMD256	530 J/m
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTMD256	730 J/m
Dart impact equipped with measuring instruments		ASTMD3763	62.1 J
Dart impact equipped with measuring instruments	Dart impact equipped with measuring instruments		ASTMD3763	56.5 J

Test Method	Test Result
ASTMD648	110 °C
	ASTMD648	121 °C
		ASTMD696	7.4E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top