Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS Jamplast JPPCABSI Jamplast, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Jamplast, Inc./Jamplast JPPCABSI |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C,3.18mm | ASTM D256 | 430 J/m |
| Dart impact | 23°C,3.18mm,TotalEnergy | ASTM D3763 | 56.5 J |
| Impact strength of cantilever beam gap | -29°C,3.18mm | ASTM D256 | 530 J/m |
| 23°C,3.18mm | ASTM D256 | 730 J/m | |
| Dart impact | -29°C,3.18mm,TotalEnergy | ASTM D3763 | 62.1 J |
| hardness | Test Condition | Test Method | Jamplast, Inc./Jamplast JPPCABSI |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | Jamplast, Inc./Jamplast JPPCABSI |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 130 % |
| bending strength | 屈服 | ASTM D790 | 82.7 MPa |
| tensile strength | 断裂 | ASTM D638 | 44.8 MPa |
| Flexural modulus | ASTM D790 | 2340 MPa | |
| tensile strength | 屈服 | ASTM D638 | 53.1 MPa |
| physical property | Test Condition | Test Method | Jamplast, Inc./Jamplast JPPCABSI |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.70 % |
| Water absorption rate | 平衡,23°C,50%RH | ASTM D570 | 0.32 % |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 3.0 g/10min |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.15 % |
| density | ASTM D792 | 1.13 g/cm³ |
| Thermal performance | Test Condition | Test Method | Jamplast, Inc./Jamplast JPPCABSI |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 110 °C |
| Linear coefficient of thermal expansion | MD：-40到82°C | ASTM D696 | 7.4E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,退火,3.18mm，HDT | ASTM D648 | 121 °C |
Contact Us
Get App
Top