MS MM-60

254

Properties:
transparent
Usages:
Automotive interior parts
Automotive External Parts
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Haze ratio		ASTM D-1003	0.3 %
transmissivity		ASTM D-1003	93 %

processability	Test Condition	Test Method	Test Result
Shrinkage rate		ASTM D-955	0.2-0.6 %

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D-1238	9 g/10min
density		ASTM D-792	1.13

Mechanical properties	Test Method	Test Result
Flexural modulus	ASTM D-790	3330（34000） MPa(KG/cm
Breaking stress	ASTM D-638	18 %
Impact strength of cantilever beam gap	ASTM D-256	27（2.8） J/m(kg.cm/cm)
Tensile stress	ASTM D-638	69（700） MPa(KG/cm
Rockwell hardness	ASTM D-785	128 R scale
bending strength	ASTM D-790	118（1200） MPa(KG/cm

Thermal performance	Test Method	Test Result
Linear coefficient of thermal expansion	ASTM D-696	7.0
Heat distortion temperature	ASTM D-648	90 °C
combustibility	UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top