PC LUVOCOM® 50-0789 LEHVOSS Group

Properties:
Fillers
carbon fiber reinforced materials
Usages:
Sports equipment
engineering accessories
medical and nursing supplies
business equipment
Compare

Technical Data Sheet

physical property	Test Method	Test Result
Melt volume flow rate	ISO 1133	10.0 cm³/10min
Shrinkage rate	DIN 16901	0.30to0.60 %
Water absorption rate		<0.20 %
density	ISO 1183	1.24 g/cm³

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	7000 MPa
tensile strength	Break	ISO 527-2	110 MPa
Tensile strain	Yield	ISO 527-2	3.0 %
Flexural modulus		ISO 178	5500 MPa
bending strength		ISO 178	150 MPa
Bending Strain		ISO 178	4.0 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1fU	40 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	1E+04 ohms
insulation resistance		IEC 60167	1E+03 ohms

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	147 °C
Continuous use temperature	UL 746B	130 °C
maximum service temperature		150 °C
vicat	ISO 306/A	160 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top