Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LUVOCOM® 50-0789 LEHVOSS Group
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 50-0789 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1fU | 40 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 50-0789 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 7000 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 110 MPa |
| Tensile strain | 屈服 | ISO 527-2 | 3.0 % |
| Bending Strain | ISO 178 | 4.0 % | |
| Flexural modulus | ISO 178 | 5500 MPa | |
| bending strength | ISO 178 | 150 MPa |
| Electrical performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 50-0789 |
|---|---|---|---|
| insulation resistance | IEC 60167 | 1E+03 ohms | |
| Surface Resistivity | IEC 60093 | 1E+04 ohms |
| physical property | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 50-0789 |
|---|---|---|---|
| Shrinkage rate | DIN 16901 | 0.30to0.60 % | |
| Melt volume flow rate | ISO 1133 | 10.0 cm³/10min | |
| Water absorption rate | 23°C,24hr | <0.20 % | |
| density | ISO 1183 | 1.24 g/cm³ |
| Thermal performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 50-0789 |
|---|---|---|---|
| Continuous use temperature | UL 746B | 130 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 147 °C |
| vicat | ISO 306/A | 160 °C | |
| maximum service temperature | ShortTerm | 150 °C |
Contact Us
Get App
Top