Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 6.5 g/10min |
| Shrinkage rate | | ASTMD955 | 0.20 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FlameRating3 | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 8690 Mpa |
| tensile strength | | ASTMD638 | 108 Mpa |
| elongation | | ASTMD638 | 2.0 % |
| Flexural modulus | | ASTMD790 | 7580 Mpa |
| bending strength | | ASTMD790 | 154 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Tensile impact strength | | ASTMD1822 | 113 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 2E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 19 KV/mm |
| dielectric constant | | ASTMD150 | 3.48 |
| dielectric constant | | ASTMD150 | 3.47 |
| Dissipation Factor | | ASTMD150 | 7E-04 |
| Dissipation Factor | | ASTMD150 | 5E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 181 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices