Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PSU GF-130 NT SOLVAY USA
UDEL®
Home appliance components,Industrial components,Electrical appliances,Valves/valve components,Pipeline components,Microwave cooker,Home appliance components,Electrical components,Food service sector,Electrical/Electronic Applications,Industrial components,Vehicle electronics,Pipeline system
Hydrolysis resistance,Chemical resistance,Filler: Glass fiber reinf
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SOLVAY USA/GF-130 NT |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 181 °C |
| mechanical properties | Test Condition | Test Method | SOLVAY USA/GF-130 NT |
|---|---|---|---|
| Bending modulus | ASTM D790 | 7580 Mpa | |
| bending strength | ASTM D790 | 154 Mpa | |
| elongation | Break | ASTM D638 | 2.0 % |
| Tensile modulus | ASTM D638 | 8690 Mpa | |
| tensile strength | ASTM D638 | 108 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/GF-130 NT |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D150 | 3.47 |
| 60Hz | ASTM D150 | 3.48 | |
| Dielectric strength | ASTM D149 | 19 KV/mm | |
| Dissipation factor | 1MHz | ASTM D150 | 5E-03 |
| 60Hz | ASTM D150 | 7E-04 | |
| Volume resistivity | ASTM D257 | 2E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | SOLVAY USA/GF-130 NT |
|---|---|---|---|
| melt mass-flow rate | 343°C/2.16kg | ASTM D1238 | 6.5 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.20 % |
| impact performance | Test Condition | Test Method | SOLVAY USA/GF-130 NT |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D1822 | 113 kJ/m² |
| flammability | Test Condition | Test Method | SOLVAY USA/GF-130 NT |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |