Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 0.955 g/cm³ |
| Water absorption rate | | ISO62 | 0.0 % |
| Water absorption rate | | ISO62 | >0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO2039-1 | 36.0 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 1000 MPa |
| Tensile stress | Yield | ISO527-2 | 24.0 MPa |
| Tensile stress | Break | ISO527-2 | 31.0 MPa |
| Tensile strain | Break | ISO527-2 | >800 % |
| Flexural modulus | | ISO178 | 900 MPa |
| Steel - Dynamic | ASTMD1894 | 0.020到0.080 |
| Steel - Static | ASTMD1894 | 0.29 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180 | 18 kJ/m² |
| | ISO180 | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | IEC60243-1 | 50 kV/mm |
| dielectric constant | | IEC60250 | 3.30 |
| Dissipation Factor | | IEC60250 | 2E-04 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| specific heat | | ASTMC351 | 2300 J/kg/°C |
| thermal conductivity | | ISO8302 | 0.14 W/m/K |
| | ISO3146 | 130 °C |
| | ISO11359-2 | 2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare