Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE LAMIGAMID® 710 SCHWARTZ GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SCHWARTZ GERMANY/LAMIGAMID® 710 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 无断裂 | |
| Impact strength of cantilever beam gap | ISO 180 | 18 kJ/m² |
| hardness | Test Condition | Test Method | SCHWARTZ GERMANY/LAMIGAMID® 710 |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 36.0 MPa |
| Mechanical properties | Test Condition | Test Method | SCHWARTZ GERMANY/LAMIGAMID® 710 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 1000 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 31.0 MPa |
| Tensile strain | 断裂 | ISO 527-2 | >800 % |
| coefficient of friction | 与钢-动态 | ASTM D1894 | 0.020to0.080 |
| tensile strength | 屈服 | ISO 527-2 | 24.0 MPa |
| Flexural modulus | ISO 178 | 900 MPa | |
| coefficient of friction | 与钢-静态 | ASTM D1894 | 0.29 |
| Electrical performance | Test Condition | Test Method | SCHWARTZ GERMANY/LAMIGAMID® 710 |
|---|---|---|---|
| Dissipation Factor | IEC 60250 | 2E-04 | |
| dielectric strength | IEC 60243-1 | 50 kV/mm | |
| dielectric constant | IEC 60250 | 3.30 |
| physical property | Test Condition | Test Method | SCHWARTZ GERMANY/LAMIGAMID® 710 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.0 % |
| 饱和,23°C | ISO 62 | >0.10 % | |
| density | ISO 1183 | 0.955 g/cm³ |
| Thermal performance | Test Condition | Test Method | SCHWARTZ GERMANY/LAMIGAMID® 710 |
|---|---|---|---|
| thermal conductivity | ISO 8302 | 0.14 W/m/K | |
| Linear coefficient of thermal expansion | MD：20到100°C | ISO 11359-2 | 2E-04 cm/cm/°C |
| specific heat | ASTMC351 | 2300 J/kg/°C | |
| melting temperature | ISO 3146 | 130 °C |
Contact Us
Get App
Top