PF Generic PF
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.41to1.50 g/cm³ | |
| Apparent density | ISO 60 | 0.58to0.88 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.35to0.90 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 6500to9110 MPa | |
| bending strength | ISO 178 | 84.9to95.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 1.3to1.5 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179 | 6.0to7.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1.0E+10到1.0E+11 ohms | |
| Volume resistivity | IEC 60093 | 1.0E+11到1.0E+12 ohms·cm | |
| relative permittivity | IEC 60250 | 12.0 | |
| Dissipation Factor | IEC 60250 | 0.25to0.30 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/C | 105to116 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top