Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PF Generic PF Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Generic/Generic PF |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 1.3to1.5 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 6.0to7.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Generic/Generic PF |
|---|---|---|---|
| Flexural modulus | 23°C | ISO 178 | 6500to9110 MPa |
| bending strength | 23°C | ISO 178 | 84.9to95.0 MPa |
| Electrical performance | Test Condition | Test Method | Generic/Generic PF |
|---|---|---|---|
| relative permittivity | 23°C | IEC 60250 | 12.0 |
| Dissipation Factor | 23°C | IEC 60250 | 0.25to0.30 |
| Volume resistivity | 23°C | IEC 60093 | 1.0E+11到1.0E+12 ohms·cm |
| Surface Resistivity | IEC 60093 | 1.0E+10到1.0E+11 ohms |
| physical property | Test Condition | Test Method | Generic/Generic PF |
|---|---|---|---|
| Shrinkage rate | 23°C | ISO 294-4 | 0.35to0.90 % |
| density | 23°C | ISO 1183 | 1.41to1.50 g/cm³ |
| Apparent density | ISO 60 | 0.58to0.88 g/cm³ |
| Thermal performance | Test Condition | Test Method | Generic/Generic PF |
|---|---|---|---|
| Heat distortion temperature | 8.0MPa,未退火，HDT | ISO 75-2/C | 105to116 °C |
Contact Us
Get App
Top