TPEE Hytrel® G3548L
196
- Properties:Oil resistanthigh strength
- Usages:packingDust cover
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 10 g/10min | |
| Taber abraser | ASTM D-1044 | 310 mg/1000rev | |
| ASTM D-1044 | 30 mg/1000rev |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | ASTM D-638 | 200 % | |
| Shore hardness | ASTM D-2240 | 35 | |
| elongation at break | ASTM D-638 | 10.3 Mpa | |
| Initial tear strength | ASTM D-1004 | 51 kN/m | |
| Rubbing modulus | ASTM D-790 | 32.4 Mpa | |
| tensile strength | ASTM D-638 | 1.7 Mpa | |
| ASTM D-638 | 2.6 Mpa | ||
| Impact strength of cantilever beam gap | ASTM D-256 | 不破裂 J/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D-1052 | >1×10 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 77 °C | |
| melting temperature | ASTM D-3418 | 156 °C | |
| Heat distortion temperature | ASTM D-648 | N/A °C | |
| ASTM D-648 | N/A °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top