Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPEE G3548L TORAY JAPAN
Hytrel®
packing、Dust cover
Oil resistant、high strength
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | TORAY JAPAN/G3548L |
|---|---|---|---|
| bending strength | ASTM D-1052 | >1×10 |
| Basic performance | Test Condition | Test Method | TORAY JAPAN/G3548L |
|---|---|---|---|
| Water absorption rate | 24小时 | ASTM D-570 | 5 % |
| Mechanical properties | Test Condition | Test Method | TORAY JAPAN/G3548L |
|---|---|---|---|
| Initial tear strength | ASTM D-1004 | 51 kN/m | |
| tensile strength | 10%伸长 | ASTM D-638 | 2.6 Mpa |
| elongation at break | 断裂 | ASTM D-638 | 10.3 Mpa |
| Shore hardness | ASTM D-2240 | 35 | |
| Rubbing modulus | 23℃ | ASTM D-790 | 32.4 Mpa |
| tensile strength | 5%伸长 | ASTM D-638 | 1.7 Mpa |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 不破裂 J/m |
| elongation at break | ASTM D-638 | 200 % |
| physical property | Test Condition | Test Method | TORAY JAPAN/G3548L |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 10 g/10min | |
| Taber abraser | H 18轮 | ASTM D-1044 | 310 mg/1000rev |
| CS-17轮 | ASTM D-1044 | 30 mg/1000rev |
| Thermal performance | Test Condition | Test Method | TORAY JAPAN/G3548L |
|---|---|---|---|
| vicat | ASTM D-1525 | 77 °C | |
| melting temperature | ASTM D-3418 | 156 °C | |
| Heat distortion temperature | @0.18Mpa，HDT | ASTM D-648 | N/A °C |
| @0.5Mpa，HDT | ASTM D-648 | N/A °C |
Contact Us
Get App
Top