Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Certificates
Reference Price
| mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
|---|---|---|---|
| bending strength | ISO 178 | 120 Mpa | |
| Tensile strain | Break | ISO 527-2 | 5 % |
| tensile strength | Break | ISO 527-2 | 80 Mpa |
| Rockwell hardness | M -Sale | ISO 2039-2 | 65 |
| Charpy Notched Impact Strength | ISO 179 | 8 kJ/m² | |
| Nominal tensile fracture strain | ISO 527-2 | 5.0 % | |
| tensile strength | Yield | ISO 527-2 | 80.0 Mpa |
| Bending modulus | ISO 178 | 3500 Mpa | |
| impact performance | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| Charpy Notched Impact Strength | 23°C | ISO 179 | 8.0 kJ/m² |
| Physical properties | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| Shrinkage rate | MD: 2.00 mm | Internal Method | 0.4 % |
| density | ISO 1183 | 1.27 g/cm³ | |
| Shrinkage rate | TD:2.00mm | Internal Method | 0.60 % |
| Spiral flow length | Internal Method | 21.0 CM | |
| Water absorption rate | Equilibrium, 23℃, 50% RH | ISO 62 | 0.15 % |
| Equilibrium,23°C,50%RH | ISO 62 | 0.15 % | |
| Shrinkage rate | MD:2.00mm | Internal Method | 0.40 % |
| TD | Internal Method | 0.6 % | |
| thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| Linear coefficient of thermal expansion | ASTM D696 | 0.000045 cm/cm/℃ | |
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/A | 142 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 4.5E-05 cm/cm/°C |
| UL flame retardant rating | 1.50 mm | UL 94 | V-0 |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 142 °C |
| Supplementary Information | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| ISO Shortcut | >PC-GF10< | ||
| Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| Volume resistivity | ASTM D257 | >1.0E+16 ohms·cm | |
| Arc resistance | ASTM D495 | 110 sec | |
| Dissipation factor | 1MHz | IEC 60250 | 9E-03 |
| Dielectric constant | 1 MHz | IEC 60250 | 2.95 |
| Dielectric strength | IEC 60243-1 | >22 KV/mm | |
| Dielectric constant | 1MHz | IEC 60250 | 2.95 |
| flammability | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| hardness | Test Condition | Test Method | IDEMITSU JAPAN/GZ-2510 |
| Rockwell hardness | M-Scale | ISO 2039-2 | 65 |
