plas
Material Selector
Log In
CategoriesAll
​Plastic MaterialsAdditivesMasterbatchMaterial SelectorPrice IndexTrade DataPlastic NewsAbout Us
Material Comparison
Add Comparison Model
Highlight Differences
Hide Same

Product Name / Manufacturer / Model

Brand

Typical Applications

Properties

Color

Form

Processing Methods

Grade

Filler

Recycled Content

Certificates

Reference Price

PA66
PA66 ASCEND USA 67R
Extrusion grade
US$ 5,120 / MT
FOB Dongguan Port
mechanical propertiesTest ConditionTest MethodASCEND USA/67R
tensile strengthYield, 23°CISO 527-285.0 Mpa
Poisson's ratioISO 527-20.40
bending strength23°CISO 17880.0 Mpa
Bending modulus23°CISO 1783000 Mpa
tensile strengthBreak, 23°CISO 527-255.0 Mpa
Tensile strainYield, 23°CISO 527-25.0 %
Tensile modulus23°CISO 527-22850 Mpa
Nominal tensile fracture strain23°CISO 527-240 %
thermal performanceTest ConditionTest MethodASCEND USA/67R
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/B200 °C
1.8 MPa, UnannealedISO 75-2/A65.0 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 55°C, 2.00 mmISO 11359-21.0E-4 cm/cm/°C
Flow : 23 to 55°C, 2.00 mmISO 11359-21.0E-4 cm/cm/°C
Melting temperatureISO 11357-3260 °C
squeeze outTest ConditionTest MethodASCEND USA/67R
Melt Temperature270 to 295 °C
Temperature in Zone 3 of the material cylinder280 to 295 °C
Temperature in Zone 4 of the material cylinder280 to 295 °C
Oral mold temperature270 to 295 °C
Temperature in Zone 5 of the material cylinder280 to 295 °C
Temperature in Zone 1 of the material cylinder280 to 295 °C
Temperature in Zone 2 of the material cylinder280 to 295 °C
Physical propertiesTest ConditionTest MethodASCEND USA/67R
Shrinkage rate横向Flow : 23°C, 2.00 mmISO 294-42.1 %
Water absorption rateEquilibrium, 23°C, 50% RHISO 622.5 %
Saturation, 23°CISO 628.5 %
Shrinkage rateFlow : 23°C, 2.00 mmISO 294-42.2 %
injectionTest ConditionTest MethodASCEND USA/67R
Temperature at the front of the material cylinder280 to 310 °C
Spray nozzle temperature280 to 310 °C
Mold temperature65 to 95 °C
Processing (melt) temperature285 to 305 °C
drying temperature60 to 75 °C
Temperature in the middle of the barrel280 to 310 °C
Suggested maximum material return ratio25 %
drying time4.0 hr
Suggested maximum moisture content0.050 to 0.10 %
Temperature at the rear of the barrel280 to 310 °C
impact performanceTest ConditionTest MethodASCEND USA/67R
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
-30°CISO 179/1eU无断裂
Electrical performanceTest ConditionTest MethodASCEND USA/67R
Volume resistivity0.750 mmIEC 600931.0E+14 ohms·cm

Supplier Join

Contact Us

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index

+86 0755 27873515

Room 906, Global Digital Building, No. 9 Gaoxin Middle 3rd Road, Maling Community, Yuehai Subdistrict, Nanshan District, Shenzhen, Guangdong Province, China