PA66 66B PA66 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Reference Price

PA66 ASCEND USA 66B

US$ 3,830 / MT

FOB Dongguan Port

thermal performance	Test Condition	Test Method	ASCEND USA/66B
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	195 °C
RTI Elec	3.0 mm	UL 746	130 °C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	70.0 °C
RTI Imp	3.0 mm	UL 746	75.0 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	1.0E-4 cm/cm/°C
RTI	3.0 mm	UL 746	85.0 °C
Linear coefficient of thermal expansion	Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	1.0E-4 cm/cm/°C
RTI Elec	0.71 mm	UL 746	130 °C
RTI Imp	1.5 mm	UL 746	75.0 °C
RTI	1.5 mm	UL 746	85.0 °C
RTI Elec	1.5 mm	UL 746	130 °C
Melting temperature		ISO 11357-3	260 °C
RTI Imp	0.71 mm	UL 746	75.0 °C
RTI	0.71 mm	UL 746	85.0 °C
Electrical performance	Test Condition	Test Method	ASCEND USA/66B
Hot wire ignition	1.5 mm	UL 746	PLC 3
High arc combustion index	0.71 mm	UL 746	PLC 0
Hot wire ignition	3.0 mm	UL 746	PLC 2
Dielectric strength	1.00 mm	IEC 60243	26 KV/mm
High voltage arc tracing rate		UL 746	PLC 0
High arc combustion index	1.5 mm	UL 746	PLC 0
Arc resistance	3.00 mm	ASTM D495	PLC 5
Hot wire ignition	0.71 mm	UL 746	PLC 4
High arc combustion index	3.0 mm	UL 746	PLC 0
flammability	Test Condition	Test Method	ASCEND USA/66B
Burning wire flammability index	0.71 mm	IEC 60695-2-12	850 °C
Extreme Oxygen Index		ASTM D2863	28 %
Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	700 °C
		1.5 mm	IEC 60695-2-13	700 °C
		0.71 mm	IEC 60695-2-13	700 °C
UL flame retardant rating	3.0 mm	UL 94	V-2
Burning wire flammability index	3.0 mm	IEC 60695-2-12	960 °C
UL flame retardant rating	0.71 mm	UL 94	HB
UL flame retardant rating		1.5 mm	UL 94	HB
Burning wire flammability index	1.5 mm	IEC 60695-2-12	850 °C
squeeze out	Test Condition	Test Method	ASCEND USA/66B
Temperature in Zone 3 of the material cylinder			250 to 295 °C
Temperature in Zone 1 of the material cylinder			250 to 295 °C
Temperature in Zone 2 of the material cylinder			250 to 295 °C
Melt Temperature			270 to 295 °C
Temperature in Zone 4 of the material cylinder			250 to 295 °C
Oral mold temperature			270 to 295 °C
Temperature in Zone 5 of the material cylinder			250 to 295 °C
mechanical properties	Test Condition	Test Method	ASCEND USA/66B
bending strength	23°C	ISO 178	90.0 Mpa
Tensile modulus	23°C	ISO 527-2/1A	2800 Mpa
Poisson's ratio	23°C	ISO 527-2	0.42
Nominal tensile fracture strain	23°C	ISO 527-2/1A	> 25 %
tensile strength	Yield, 23°C	ISO 527-2/1A	85.0 Mpa
Bending modulus	23°C	ISO 178	3100 Mpa
tensile strength	Break, 23°C	ISO 527-2/1A	55.0 Mpa
Tensile strain	Yield, 23°C	ISO 527-2	5.0 %
Physical properties	Test Condition	Test Method	ASCEND USA/66B
Water absorption rate	Saturation, 23°C	ISO 62	8.5 %
Water absorption rate		Equilibrium, 23°C, 50% RH	ISO 62	2.5 %
Shrinkage rate	Flow : 2.00 mm	ISO 294-4	2.1 %
Shrinkage rate		横向Flow : 2.00 mm	ISO 294-4	2.0 %
impact performance	Test Condition	Test Method	ASCEND USA/66B
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	无断裂

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index