PA66 A 60G1 V30 PA66 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PA66 SOLVAY FRANCE A 60G1 V30

Injection grade

US$ 5,140 / MT

FOB Shenzhen Port

flammability	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
UL flame retardant rating	1.6 mm	UL 94	V-0
Extreme Oxygen Index		ISO 4589-2	33 %
Hot filament ignition temperature	0.8 mm	IEC 60695-2-13	775 °C
Burning wire flammability index	1.6 mm	IEC 60695-2-12	960 °C
European Railways Certifications	R22	EN 45545-2	HL3
European Railways Certifications		R23	EN 45545-2	HL3
UL flame retardant rating	0.8 mm	UL 94	V-0
UL flame retardant rating		3.2 mm	UL 94	V-0
Burning wire flammability index	3.2 mm	IEC 60695-2-12	960 °C
Burning wire flammability index		0.8 mm	IEC 60695-2-12	960 °C
impact performance	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	9.5 kJ/m²
Impact strength of cantilever beam gap	23°C	ASTM D256	85 J/m
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	60 kJ/m²
Impact strength of simply supported beam without notch		-30°C	ISO 179/1eU	60 kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	10 kJ/m²
mechanical properties	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
Bending modulus	23°C	ASTM D790	10000 Mpa
bending strength	23°C	ISO 178	255 Mpa
Tensile modulus	23°C	ISO 527-2/1A	10200 Mpa
tensile strength	Break, 23°C	ASTM D638	140 Mpa
tensile strength		Break, 23°C	ISO 527-2/1A	150 Mpa
bending strength	23°C	ASTM D790	225 Mpa
elongation	Break, 23°C	ASTM D638	3.0 %
elongation		Break, 23°C	ISO 527-2	2.3 %
injection	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
Temperature at the front of the material cylinder			270 to 280 °C
Mold temperature			60 to 90 °C
drying temperature			80 °C
Temperature in the middle of the barrel			265 to 275 °C
Suggested maximum moisture content			0.20 %
Temperature at the rear of the barrel			265 to 275 °C
Physical properties	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.8 %
Shrinkage rate	Flow	ISO 294-4	0.35 %
Water absorption rate	24 hr, 23°C	ISO 62	0.73 %
Water absorption rate		Saturation, 23°C	ISO 62	4.3 %
Shrinkage rate	横向Flow	ISO 294-4	1.0 %
density		ISO 1183/A	1.46 g/cm³
Outdoor applicability	全部	UL 746C	f1
Thermogravimetric analysis (TGA)	1%失重温度	NF F16-101	I3
Electrical performance	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
Volume resistivity		IEC 60093	6.0E+14 ohms·cm
Dielectric strength	0.800 mm	IEC 60243-1	38 KV/mm
thermal performance	Test Condition	Test Method	SOLVAY FRANCE/A 60G1 V30
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/Af	245 °C
Melting temperature		ISO 11357-3	263 °C

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index