PPS R-4-230BL PPS vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PPS CPCHEM NETHERLANDS R-4-230BL

Fill level

US$ 5,870 / MT

FOB Dongguan Port

mechanical properties	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
elongation	Break	ASTM D638	1.2 %
bending strength		ISO 178	210 Mpa
compressive strength		ASTM D695	275 Mpa
Tensile strain	Break	ISO 527-2	1.1 %
tensile strength		ASTM D638	165 Mpa
Poisson's ratio			0.43
bending strength		ASTM D790	221 Mpa
Bending modulus		ASTM D790	14500 Mpa
Bending modulus			ISO 178	14000 Mpa
tensile strength		ISO 527-2	145 Mpa
thermal performance	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
UL temperature rating		UL 746B	200to220 °C
Linear coefficient of thermal expansion	TD：导热系数	ASTME831	0.31 W/m/K
		MD：100to200°C	ASTME831	1.5E-05 cm/cm/°C
		MD：-50to50°C	ASTME831	1.5E-05 cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	265 °C
Linear coefficient of thermal expansion	TD：-50to50°C	ASTME831	4E-05 cm/cm/°C
Linear coefficient of thermal expansion		TD：100to200°C	ASTME831	8E-05 cm/cm/°C
hardness	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
Rockwell hardness	M-Sale	ASTM D785	104
Rockwell hardness		R-Sale	ASTM D785	122
Electrical performance	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
Dissipation factor	25°C,1MHz	ASTM D150	2E-03
Surface resistivity		ASTM D257	1E+16 ohms
Dielectric constant	25°C,1MHz	ASTM D150	3.90
Volume resistivity		ASTM D257	1E+16 ohms·cm
Compared to the anti leakage trace index	CTI	UL 746	PLC 4
insulation resistance	90°C		1E+12 ohms
Arc resistance		ASTM D495	125 sec
Dissipation factor	25°C,1kHz	ASTM D150	2E-03
Dielectric constant	25°C,1kHz	ASTM D150	3.90
Dielectric strength		ASTM D149	20 KV/mm
flammability	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
Extreme Oxygen Index		ASTM D2863	50 %
UL flame retardant rating	1.6mm	UL 94	V-05VA
Physical properties	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
Water absorption rate	23°C,24hr	ASTM D570	0.020 %
density		ASTM D792	1.68 g/cm³
Shrinkage rate	MD：3.20mm		0.20 %
Shrinkage rate		TD：3.20mm		0.50 %
impact performance	Test Condition	Test Method	CPCHEM NETHERLANDS/R-4-230BL
Impact strength of cantilever beam gap	3.17mm	ASTM D256	80 J/m
Suspended wall beam without notch impact strength	3.18mm	ASTM D4812	400 J/m
Suspended wall beam without notch impact strength			ISO 180	20 kJ/m²
Impact strength of cantilever beam gap		ISO 180/A	8.0 kJ/m²

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index