Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.68 g/cm³ |
| Shrinkage rate | | | 0.20 % |
| Shrinkage rate | | | 0.50 % |
| Water absorption rate | | ASTMD570 | 0.020 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 104 |
| Rockwell hardness | | ASTMD785 | 122 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FlameRating | | UL94 | V-05VA |
| Limiting Oxygen Index | | ASTMD2863 | 50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTMD790 | 221 Mpa |
| Bending stress | | ISO178 | 210 Mpa |
| compressive strength | | ASTMD695 | 275 Mpa |
| Poisson's ratio | | | 0.43 |
| tensile strength | | ASTMD638 | 165 Mpa |
| Tensile stress | | ISO527-2 | 145 Mpa |
| elongation | | ASTMD638 | 1.2 % |
| Tensile strain | | ISO527-2 | 1.1 % |
| Flexural modulus | | ASTMD790 | 14500 Mpa |
| Flexural modulus | | ISO178 | 14000 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 80 J/m |
| Impact strength of cantilever beam gap | | ISO180/A | 8.0 kJ/m² |
| Suspended wall beam without notch impact strength | | ASTMD4812 | 400 J/m |
| | ISO180 | 20 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTMD150 | 3.90 |
| dielectric constant | | ASTMD150 | 3.90 |
| Dissipation Factor | | ASTMD150 | 2E-03 |
| Dissipation Factor | | ASTMD150 | 2E-03 |
| arc resistance | | ASTMD495 | 125 sec |
| Compared to the Leakage Tracking Index (CTI) | | UL746 | 150 V |
| InsulationResistance2 | | | 1E+12 ohms |
| Surface Resistivity | | ASTMD257 | 1E+16 ohms |
| Volume resistivity | | ASTMD257 | 1E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 20 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTMD648 | 265 °C |
| | ASTME831 | 1.5E-05 cm/cm/°C |
| | ASTME831 | 1.5E-05 cm/cm/°C |
| | ASTME831 | 4E-05 cm/cm/°C |
| | ASTME831 | 8E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ASTME831 | 0.31 W/m/K |
| UL temperature rating | | UL746B | 200to220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices