PC 1695 551022 PC vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PC COVESTRO BELGIUM 1695 551022

Injection grade

US$ 5,840 / MT

FOB Dongguan Port

optical performance	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Refractive index		ISO 489	1.578
Transmittance rate	1000 μm1000 μm	ISO 13468-2	89 %
Electrical performance	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Dissipation factor	23℃，1 MHz23°C, 1 MHz	IEC 60250	0.009
Dielectric strength	23 ℃，1 mm23℃，1.00 mm	IEC 60243-1	35 KV/mm
Relative permittivity	23℃，1 MHz23°C, 1 MHz	IEC 60250	2.9
Extreme Oxygen Index		ISO 4589-2	26 %
Compared to the anti leakage trace index	Solution BSolution B	IEC 60112	PLC 4
UL flame retardant rating	3.00 mm	UL 94	HB
UL flame retardant rating		1.50 mm	UL 94	HB
Volume resistivity	23℃23℃	IEC 60093	100000000000000000 ohms·cm
Glow wire combustion index (GWFI)	2.0 mm2.0 mm	IEC 60695-2-12	900 °C
Compared to the anti leakage trace index	Solution ASolution A	IEC 60112	PLC 2
Relative permittivity	23℃，100 Hz23°C, 100 Hz	IEC 60250	3
Surface resistivity		IEC 60093	10000000000000000 ohms
Dissipation factor	23℃，100 Hz23°C, 100 Hz	IEC 60250	0.001
thermal performance	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Hot deformation temperature	1.8 MPa，Unannealed1.8 MPa，Unannealed	ISO 75-2/A	138 °C
Vicat softening temperature	B120B120	ISO 306/B120	158 °C
Relative Heat Index (RTI)	强度机械性能强度机械性能	UL 746	140 °C
Linear coefficient of thermal expansion	TD：23~55℃TD：23 to 55℃	ISO 11359-2	0.000065 1/℃
Relative Heat Index (RTI)	冲击机械性能冲击机械性能	UL 746	130 °C
Relative Heat Index (RTI)		电气性能电气性能	UL 746	140 °C
Linear coefficient of thermal expansion	MD：23~55℃MD：23 to 55℃	ISO 11359-2	0.000065 1/℃
Physical properties	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Water absorption rate	Equilibrium，23℃，50% RHEquilibrium，23℃，50% RH	ISO 62	0.12 %
Water absorption rate		Saturation，23℃Saturation，23℃	ISO 62	0.3 %
density	23°C	ISO 1183	1.18 g/cm³
Shrinkage rate	MD：2.0 mmFlow : 0,0787 in	ISO 294-4	0.75 %
Melt Volume Flow Rate (MVR)	330℃，2.16 kg330℃/2.16 kg	ISO 1133	45 cm3/10min
Shrinkage rate	TD：2.0 mmAcross Flow : 0.0787 in	ISO 294-4	0.75 %
melt mass-flow rate	330℃，2.16kg330℃/2.16 kg	ISO 1133	46 g/10min
mechanical properties	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Tensile modulus	23℃23℃	ISO 527-1-2	2400 Mpa
Nominal tensile fracture strain	23℃23℃	ISO 527-2/50	> 50 %
tensile strength	Yield，23℃Yield，23℃	ISO 527-2/50	68 Mpa
Bending modulus	23℃23℃3	ISO 178	2400 Mpa
Ball Pressure Test		ISO 2039-1	120 Mpa
Tensile strain	Yield，23℃Yield，23℃	ISO 527-2/50	6.2 %
bending strength	23℃	ISO 178	100 Mpa
Supplementary Information	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Electrolytic corrosion	23℃23℃	IEC 60426	A1
impact performance	Test Condition	Test Method	COVESTRO BELGIUM/1695 551022
Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	No Break
Impact strength of simply supported beam without notch		-30℃-30°C	ISO 179/1eU	No Break

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index