PA66 R530J NT0724 PA66 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PA66 ASCEND USA R530J NT0724

Enhanced level

US$ 4,290 / MT

FOB Dongguan Port

impact performance	Test Condition	Test Method	ASCEND USA/R530J NT0724
Impact strength of simply supported beam without notch	-30°C	ISO 179	65 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179	75 kJ/m²
thermal performance	Test Condition	Test Method	ASCEND USA/R530J NT0724
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	260 °C
RTI Elec	3.0 mm	UL 746	120 °C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	250 °C
RTI Imp	3.0 mm	UL 746	105 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	1.1E-4 cm/cm/°C
RTI	3.0 mm	UL 746	120 °C
Linear coefficient of thermal expansion	Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	2.2E-5 cm/cm/°C
RTI Elec	0.75 mm	UL 746	120 °C
RTI Imp	1.5 mm	UL 746	85.0 °C
RTI	1.5 mm	UL 746	120 °C
RTI Elec	1.5 mm	UL 746	120 °C
Melting temperature		ISO 11357-3	260 °C
RTI Imp	0.75 mm	UL 746	85.0 °C
RTI	0.75 mm	UL 746	115 °C
Electrical performance	Test Condition	Test Method	ASCEND USA/R530J NT0724
Hot wire ignition	1.5 mm	UL 746	PLC 4
High arc combustion index	0.75 mm	UL 746	PLC 0
Hot wire ignition	3.0 mm	UL 746	PLC 4
Dielectric strength	1.00 mm	IEC 60243	24 KV/mm
High voltage arc tracing rate		UL 746	PLC 1
High arc combustion index	1.5 mm	UL 746	PLC 0
Arc resistance	3.00 mm	ASTM D495	5.00 sec
Volume resistivity	0.750 mm	IEC 60093	1.0E+13 ohms·cm
Hot wire ignition	0.75 mm	UL 746	PLC 4
High arc combustion index	3.0 mm	UL 746	PLC 0
flammability	Test Condition	Test Method	ASCEND USA/R530J NT0724
UL flame retardant rating	3.0 mm	UL 94	HB
Burning rate	2.00 mm, 自动灭火	ISO 3795	0.0 mm/min
UL flame retardant rating	0.75 mm	UL 94	HB
UL flame retardant rating		1.5 mm	UL 94	HB
Physical properties	Test Condition	Test Method	ASCEND USA/R530J NT0724
Shrinkage rate	横向Flow : 23°C, 2.00 mm	ISO 294-4	0.90 %
Shrinkage rate		Flow : 23°C, 2.00 mm	ISO 294-4	0.40 %
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.9 %
Water absorption rate		24 hr, 23°C	ISO 62	0.90 %
injection	Test Condition	Test Method	ASCEND USA/R530J NT0724
Temperature at the front of the material cylinder			280 to 310 °C
Mold temperature			65 to 95 °C
Processing (melt) temperature			285 to 305 °C
Suggested maximum material return ratio			25 %
Spray nozzle temperature			280 to 310 °C
drying temperature			80 °C
Temperature in the middle of the barrel			280 to 310 °C
drying time			4.0 hr
Temperature at the rear of the barrel			280 to 310 °C
mechanical properties	Test Condition	Test Method	ASCEND USA/R530J NT0724
bending strength	23°C	ISO 178	270 Mpa
tensile strength	Break, 23°C	ISO 527-2	195 Mpa
Tensile modulus	23°C	ISO 527-2	10000 Mpa
Poisson's ratio	23°C	ISO 527	0.40
Bending modulus	23°C	ISO 178	9600 Mpa
Tensile strain	Break, 23°C	ISO 527-2	3.0 %

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index