Material Properties:Low warpage｜Excellent surface finish｜Filler: Glass fiber reinforced material｜20% filler by weight
Application Areas:--
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Melt volume flow rate		ISO 1133	20.0 cm3/10min

flammability	Test Condition	Test Method	Test Result
Burning wire flammability index		IEC 60695-2-12	700 °C
Hot filament ignition temperature		IEC 60695-2-13	725 °C
Hot filament ignition temperature	Hot filament ignition temperature		IEC 60695-2-13	725 °C
burning rate		ISO 3795	20 mm/min
Flammability level		IEC 60695-11-10,-20	HB
Flammability level	Flammability level		IEC 60695-11-10,-20	HB
Burning wire flammability index		IEC 60695-2-12	700 °C

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	45 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179/1eU	30 kJ/m²

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2/1A/1	6500 Mpa
tensile strength	ISO 527-2/1A/5	96.0 Mpa
Tensile strain	ISO 527-2/1A/5	2.6 %

Electrical performance	Test Condition	Test Method	Test Result
Compared to the Leakage Tracking Index (CTI)		IEC 60112	V

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Bf	210 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/Af	172 °C
vicat		ISO 306/A50	205 °C
vicat	vicat		ISO 306/B50	145 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top