injection	Test Condition	Test Method	Test Result
drying temperature			95 to 105 °C
drying time			3.0 to 4.0 hr
Suggested maximum moisture content			0.020 %
Suggested injection volume			30 to 70 %
Temperature at the rear of the barrel			230 to 280 °C
Temperature in the middle of the barrel			245 to 290 °C
Temperature at the front of the material cylinder			255 to 295 °C
Spray nozzle temperature			265 to 295 °C
Processing (melt) temperature			265 to 295 °C
Temperature			65 to 95 °C
Back pressure			0.300 to 0.700 Mpa
screw speed			20 to 100 rpm
Exhaust hole depth			0.038 to 0.051 mm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	123 °C
Heat distortion temperature	Heat distortion temperature		ASTM D648	121 °C
Linear coefficient of thermal expansion		ASTM E831	9.4E-5 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top