thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45 MPa, 未退火, 6.40 mm	ASTM D648	245 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8 MPa, 未退火, 6.40 mm	ASTM D648	210 °C
vicat		ASTM D15253	240 °C
Linear coefficient of thermal expansion	-20 到 150°C，流动	ASTM E831	4.0E-5 - 5.0E-5 cm/cm/°C
RTI Elec		UL 746	50.0 °C
RTI Imp		UL 746	50.0 °C
RTI		UL 746	50.0 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	1.5 mm	UL 94	HB

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate	流动 : 3.20 mm	内部方法	0.60 - 0.80 %
shrinkage rate	shrinkage rate	横向流动 : 3.20 mm	内部方法	0.65 - 0.85 %
Water absorption rate	24 hr, 50% RH	ASTM D570	0.50 %
Water absorption rate	Water absorption rate	平衡, 50% RH	ASTM D570	1.0 %

Electrical performance	Test Method	Test Result
arc resistance	ASTM D495	PLC 6
Compared to the Leakage Tracking Index (CTI)	UL 746	PLC 3
High arc combustion index (HAI)	UL 746	PLC 0
High Voltage Arc Traceability Rate (HVTR)	UL 746	PLC 3
Hot wire ignition (HWI)	UL 746	PLC 0

injection	Test Condition	Test Method	Test Result
drying temperature			95 to 105 °C
drying time			3.0 to 4.0 hr
Suggested maximum moisture content			0.070 %
Suggested injection volume			30 to 50 %
Temperature at the rear of the barrel			265 to 305 °C
Temperature in the middle of the barrel			270 to 305 °C
Temperature at the front of the material cylinder			275 to 305 °C
Spray nozzle temperature			280 to 305 °C
Processing (melt) temperature			280 to 305 °C
mold temperature			75 to 120 °C
Back pressure			0.300 to 1.40 Mpa
screw speed			20 to 100 rpm
Exhaust hole depth			0.013 to 0.038 mm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	屈服	ASTM D638	89.0 Mpa
tensile strength	tensile strength	断裂	ASTM D638	88.0 Mpa
elongation	断裂	ASTM D638	10 %
flexural modulus	100 mm 跨距	ASTM D790	3960 Mpa
bending strength	屈服, 100 mm 跨距	ASTM D790	155 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top